Looking for:
- Acronis true image 2017 authentication settings free download |
Acronis true image 2017 authentication settings free download
I have three PCs 1-desktop, 2-laptops all running Win10 x64 Pro. My desktop has several drives one of which is for my TI backups for all of my systems.
The drive is shared with full permissions for everyone. During a recent cleanup and reorganization of my desktop I reassigned most of the drives and reshare all of them with full permissions. On both laptops when TI attempts to access the drive on my desktop for my TI backups a window pops up titled Authentication Settings" and prompts for a User name and password. I'm not sure what ID and password it is requesting.
I tried using the ID and PW used to signon to the laptops and desktop which are all the same and this did not work. All system have TI , I'm not sure which builds are on the three systems. In TI when I click on about I don't see this information. Why is TI asking for this in that the drive is shared under windows with full permissions for everyone.
If you're not using v, yet, I would upgrade. There was a but in that would not allow a network connection if there were mapped drives in Windows already. There was a hotfix manual download to address the bug, but addresses it directly with some other bug fixes.
You can grab the full installer from your account login under prodcut downloads. Or, you can get it from the Acronis page for " list of changes ". If, for some reason, you want to stick with your current version assuming , then you'd need to apply the hotfix instead.
MVP LogViewer MVP Google Drive Cleanup Utility Cloning Correctly Clone vs Backup Community Tools Contact Support Product Documentation Common OEM Drivers. Bobbo, how do I determine the version installed? Please see KB Acronis True Image Troubleshooting Issues Related to NAS Credentials which has steps that you can follow to clear any stored credentials held by Acronis in the Windows Registry then re-enter these if you have recently changed this for your network drives.
Note: Please do not expect any instant reply for private messages as I am often unable to access these due to forum timeout errors! I suspect that after you changed the permissions of the shared drive, it no longer registers as being the same to Acronis.
Please keep in mind that there are local folder permissions, and share permissions as well. Giving everyone full access to the local folder, does not necessarily give full permissions to everyone on the share. Also, if you have a Windows Home Group setup, your Windows machines are probably using Homegroup to automatically authenticate to the shares. Third party applications may not be able to use the HomeGroup permissions since that is done in the background directly by Windows for basic file sharing.
Last, when using a workgroup, "everyone" is still different on each PC. Accounts for network shares are actually like this As a test, I created a new folder on my main PC and shared it only to "everyone" and not my homegroup or anyone else. Even in Windows, I am presented with a prompt to authenticate to this "new share". You may not have seen this in Windows if you saved the previous logon in Windows credential manager when you originally attached to the share. For Acronis to work, I suspect you need to re-pick the destination in the backup settings for the remote computers.
Do I need to uninstall In that I accidently installed NG I cannot just install b, I tried and it stated something to the effect that I had a newer version installed. The NG version seems to be installed as a registered version.
Again to day I tried to download the latest standard version and my attempt failed. The Acronis website does something werid and I never get the download. I do not have a home group. This always gave me a lot of issues I could not reslove so I just stayed with workgroups. All of my systems have Win10 x64 Pro.
I don't know if this makes any difference. I see what you are saying about "everyone" being different on each machine but I don't understand it.
Too much for my simple brain. Just TI hase a problem thus to me it seems to be a TI issue and not a sharing issue. Also all three of my systems have the same user and PW for the logon.
Again I tried to download the standard version via my account and this time I was successful except I have no idea what build I downloaded. Sorry but I have to throw a rock at Acronis for not providing this information. Just as a test I again tried to access the network drive from my wife's laptop, I get the prompt, it fails I'm assuming I need to enter the username and PW for the system I'm trying to access but the username and pw are the same for all three of my systems.
I click on the button for the knowledge base and get "There is no information about this error available now. You can use the links below to search for any additional information that might be available. Sorry but how stupid is this? This is super sloppy programming on the part of the developers.
On my wife's laptop I just cloned the task and it let me change the location for the network drive. The BU is now running. If you have accepted a 'free' or very low cost upgrade to ATIH NG then you could keep using it for the year that you are subscribed to this Premium version then make a decision as to whether you want to continue with it or not?
When your subscription comes up for renewal you will probably be hit with a significant price increase to continue with NG and you should check that you are not setup for automatic renewal unless you fully intend to continue with NG. To change over from NG to the Standard version would require that you fully remove NG then do a clean install of the standard product.
I would advise usng the Acronis Cleanup Tool link below after uninstalling NG normally if going that route. Steve, much thanks for the feedback. I looked the two different offerings, e.
I'm on a fixed income and the budget is super tight as it is. For me this is too much! I've added to my todo list an uninstall of NG and revert back to the standard. Big thanks for the suggestion and links. My current license expires Nov The feature of NG that is of most interest to me is the protection against data loss to ransomware. I have never been convinced that backing up to the cloud is a good solution for me mainly because my ISP provides very slow upload speeds and if I exceed the monthly transfer limit they will bill me huge amounts.
Ref "you should check that you are not setup for automatic renewal" How do I do this? I've signed to my Acronis account and I don't see anything that suggest an automatic renewal or subscription. I've been trying to implement Windows Storage Spaces on my desktop and I've hit a major issue and with my current hardware configuration I cannot install Storage Spaces on my desktop.
This was discovered after attempting and trying to find a solution and after devoting about hours to this project I pulled the plug. I have a possible plan to implement Storage Spaces on my old laptop and this is also on my todo list and remains to be seen. I think storage spaces will make things more difficult for you in the long run - especially when it comes to backing up as they will be logical volumes.
Essentially, these are virtual or software RAID's. Hopefully the following answers your question. It is rather long but it has what I think are all the details.
The short answer is I could create a very workable storage solution for almost no out-of-pocket cost. A few years ago I had a hardware RAID 5 and it got to the point where it was filled very near capacity. Unless things have changed to upgrade a RAID array, you have to dump all the data to other drives unless you can just install a new RAID and copy from the old to the new , purchase a set of equal size drives if you use drives of different sizes the array will default to make all drives the size of the smallest drive.
Because I could not afford to purchase a set of drives as one purchase I moved all the data to individual drives and until now I have gone with individual drives. Again a budget issue. Untill very recently all of the drives were being used. Also because of the ranges of different sizes I did not have enough to for a large RAID that would hold everything. About 2 months ago I discovered that Windows 8 and up included Storage Spaces and had the feature that I could use drives of different sizes.
This seemed to work great but the main problem you have with a setup like this is you are really limited by the smallest drive but not as much as you would be in a RAID 5 array. I quickly filled the pool and as I got near the capacity Windows kept informing me I needed to add a drive.
I ignored the warning and kept adding more files. At the point of the capacity Windows stopped allowing me to add more files. This was to be expected and this is when I realized that using a 3TB drive in my configuration it was the limiting factor. If I had put several 3TB drives in the pool then it would not be as much of an issue.
BTW filling the pool to max capacity did create another major issue for me. I was NOT able to add another drive and never discovered why this was the case.
Acronis True Image | Knowledge Base
Беккер поднял. С левого экрана в камеру неотрывно смотрели Дэвид и агенты Смит и Колиандер. - У вас есть ключ? - сказал Нуматака с деланным интересом. Если он почует, о чем бы ни шла речь, он бы сразу мне позвонил. Стеклянный графин на верхней полке угрожающе подпрыгнул и звонко опустился на место.
- Acronis true image 2017 authentication settings free download
- Хуже. - Да вроде бы, - смущенно проговорил Беккер. - Так, что вручит победителю ключ, обещая бесплатный ночлег в городе. Из-за решетчатой двери кухни на нее смотрели .
No comments:
Post a Comment